The furrow
Horse, steam, tractor, and a plough you push with your chest
The furrow is the same idea in every age: a cut, a turn, a next bout beside the last. The machines, and the people, are not the same. Open a drawer.

Open a drawer to look closer at the plough in all its forms: a wooden horse plough at a championship that was mostly about tractors, a Canadian plough that arrived in a cream-separator deal, a butterfly that turns over at the end of the furrow, and hand tools named for a crooked foot and a chest.
A wooden plough at a tractor-age championship
The Museum of English Rural Life holds a Wiltshire horse or swing plough, object 52/102, with a wooden mouldboard and an iron share. It was used in a live horse-ploughing demonstration at the 1956 World Ploughing Championships in Shillingford, Oxfordshire, by the champion ploughman Mr Nelson Tamblin, from Liskeard, Cornwall. The Museum’s marquee exhibition at the championships, the catalogue says, “was largely concerned with tractor ploughing.” A photograph of the demonstration is in the MERL archive as 60/1475. The family farmed West Tuelmenna Farm, Liskeard, bought by his father in 1921. The Museum confirmed his first name, Nelson, in May 2015 with his great-nephew Rob Tamblin and his nephew Roger Tamblin. [source]
A set of model ploughs, made for the Festival of Britain
For the 1951 Festival of Britain, a set of scale-model ploughs was shown in the Country Pavilion on the South Bank Exhibition site in London. The Festival themes were “Land” and “People,” and the models sat “alongside examples of modern tractor technology.” They included a seventeenth-century Hertfordshire plough (MERL 52/68), a caschrom, a breast plough, a medieval plough, an eighteenth-century Hertfordshire plough, a Rotherham plough, a Kent plough and a Ley plough. After the Festival, the newly formed Museum of English Rural Life acquired the models. The Kent plough and Ley plough were later withdrawn from the collection. The whereabouts of the eighteenth-century plough “are not currently known.” Of the others, Madeleine Ding writes, “the other five models still survive intact.” [source] [source]
A crooked foot, and a plough pushed from the chest
Two of the Festival models were hand tools. The caschrom, or foot plough, takes its name from the Gaelic for “crooked foot.” It was wooden, “especially for use in rocky soils where ploughs could not go, or perhaps by people who could not afford a plough,” and was used mainly in the Scottish Highlands, with similar tools also found in Ireland and Norway. The breast plough was “an early type of manual plough or turf-lifting device, that sliced off and removed the top layer of soil.” A T-shaped bar at the handle end “pushed against the worker’s chest or thighs,” with a triangular blade at the other. These ploughs “were in common use until the early-twentieth century for paring turf, levelling ground, and clearing land of stubble.” [source]
A plough that turns over at the end of the furrow
The MERL holds a one-way reversible, or “butterfly,” plough made by Richard Hornsby & Sons Ltd of Grantham around 1900, object 62/524. It has two mouldboards on a swivelling beam: one in the ground, the other lifted in the air. At the end of the furrow the ploughman released a catch and the beam turned over, so the next bout could be cut beside the last without dragging the plough back idle. The firm began as Seaman and Hornsby, at Spittlegate Ironworks, Grantham, in 1815. By the end of the nineteenth century it had 1,500 employees on a 17-acre site. [source]
A Canadian plough that arrived in a cream-separator deal
The Lister-Cockshutt No. 6 is a two-furrow tractor plough, made in 1936 by the Cockshutt Plow Company of Brantford, Ontario, and imported by R. A. Lister & Co. of Dursley. The arrangement was reciprocal: Lister imported Cockshutt ploughs, and Cockshutt imported Lister cream separators. This example, originally painted red, has disc coulters, semi-digging breasts, two spare “B” mouldboards and a forged-steel main frame. It was used at Low Farm, Hemingfield, Barnsley, and was bought at auction when the farm was sold on 30 May 1979. [source]
Two engines, a cable, and a plough in between
Steam ploughing, as a mid-1980s photograph of a Fowler engine at Staplehurst in Kent still shows, was done with two engines, one at each side of the field. They winched the plough to and fro between them on a cable, so the heavy engines themselves did not have to walk the wet soil. A balance plough at the 2016 World Ploughing Championships at Crockey Hill, photographed by Michael Trolove, is the other end of the same idea, still demonstrated long after steam left ordinary commercial fields.
The Fordson was cheaper than steam or horses
The official MERL label on the Lister-Cockshutt plough puts the change of era in one clean paragraph: “The mass-produced Fordson tractor was more compact and efficient than steam ploughing equipment, and faster than horse ploughing. It was also cheaper than either of these options. It worked on the same principle that the Ford Model T had used to dominate the motor car industry; that an everyday person should be able to afford one.” [source]

A Muir Hill tractor and a Ransomes reversible plough, with spectators at the edge of the field, and a Fowler engine in steam at Ashley Hall, are two later chapters of the same story: one pulled from the hitch, one still speaking the language of cable and balance plough.
Enjoyed the furrow?
No pop-ups. No intrusive advertising. Just interesting stuff. A little support helps the next farmyard site get built.